824

 
 
     
 

Meridians 
Index

Products
Compact
Modular
BCM
Option

 

Telephones
Telephones
Used

Services
Installation
Maintenance
Programming
Routing
Training


terminals: user guides guides

 

The Meridian Norstar 824 was the predecessor  to the Modular 032 system.  

As its name suggests it was, out of the box, capable of 8 analogue lines and 24 extensions. The extensions could be Meridian terminals or, with analogue adapters, any standard 2wire device.

Theoretically, the maximum size would be 80 analogue lines or 120 extensions.

Its distinguishing feature, to set it apart from other Meridians, is the fact that the wall mounted unit appears to be a two door cabinet yet has only one door on the right hand side.

Taking the switch above 824 means fitting an expansion card in the ccu allowing for either 2 or 6 extension/trunk expander modules to be fitted.

 

Taking over from pre-existing BT installs, such as the Viceroy, it sometimes retained the earth calling lines. These can be converted to loop without any problems.

The major problem with many 824s is the fact that, because of age, their RAM batteries have failed. This means that a power cut can 'wipe' the memory clean. All 824s should have a detailed record made of their programming to prepare for this.

These early Meridians have no LCR/ARS ability.

 

SJG provides full installation,  maintenance & support for the 824.

The future for theses switches is usually to change them out for the Modular Plus which offers digital lines and increased capacity yet allows the existing wiring & telephones to be retained.

call barring

Meridian Norstar 824 config guide

Control unit  

Code Item Notes
M824ccu 824 ccu 8+24 control unit [note: 4 primary software variants]

Expansion  

Code Item Notes
M824ex2 2 port expansion card allows the installation of 2 expansion modules
M824ex6 6 port expansion card allows the installation of 6 expansion modules
M824e16 16 port extension module connects to expansion card: 16 extensions
M824tm1 3 slot trunk module connects to expansion card: allows 3 trunk cards
M824tk1 4 port trunk card fits in trunk module: allows 4 analogue trunks
M824ac15 AC15 module connects to expansion card: 1 ac15 circuit
M824ata analogue terminal adapter uses an extension port: provides 1 analogue extension circuit
M824cli call logging interface uses an extension port: provides a serial port for call logging