SJG KX-TDA User Guide
 

Making Calls
 

return to user guide menu

09

 

Basic Calling

¨Calling Another Extension

¨Calling an Outside Party

¨Making a Call to a Private Network (TIE Line Access)

¨Using an Account Code (Account Code Entry)

 

 
 

Calling Another Extension

(Intercom Call)

 

To call using a directory, refer to Using the Directories

If you are an operator or dial some extensions frequently, DSS buttons are useful [see Create or edit a Direct Station Selection (DSS) button]
 

 

Calling An Operator

(Operator Call)

You can call an extension or a group assigned as the operator:

in the UK, 0 is used to call the operator[s]
 
 

Calling an Outside Party

You have to seize an outside line before dialling an outside phone number because external calls are made via the SJG KX-TDA .

Select one of the following methods:

To select an idle outside line automatically (Automatic Line Access)

in the UK, 9 is used for outside access
 

To select an idle outside line in the specified outside line group automatically (Outside Line Group Access)

 
 

To select the specified outside line [PT only]

The S-CO button or G-CO button light shows the current status as follows:

Off: The line is idle.

Red on: The line is in use.

You may be restricted from making calls to the specified outside number [eg you are barred from international - 00 - numbers.

To confirm number before dialling: you can enter a phone number and confirm it on the display and then go off-hook. (Pre-dialling)

Call Charge Reference: You can confirm your total call charges by pressing the Charge Reference button [not usually available in the UK]

To make a call to another party without going back on-hook: press the FLASH/RECALL button. It will re-access the outside line and provide external dial tone. Pressing the Terminate button will provide intercom dial tone. You can dial the new phone number without going on/off-hook.

 
 
 

Making a Call to a Private Network (TIE Line Access)

When your SJG KX-TDA is connected to a private network, you can access it.

To call:

 
 
 

Using an Account Code (Account Code Entry)

You may give a specified account code to extension users and check their telephone usage. You can specify an account code for each client and check the call duration.

• A Panasonic proprietary telephone extension user can enter an account code during a conversation and when hearing reorder tone after the other party hangs up.

• Account codes may use the digits "0" through "9".

• If you enter the wrong code, press the "*" key and re-enter the account code.

• You may not be able to make an outside call without an account code. Entry mode is assigned to each user. Ask your manager for your mode.

• For your convenience, you can store the code with the phone number in the memory (e.g., Speed Dialling).

Customising Your Phone: See Customising the Buttons: Create or edit an Account button.

 

 

 

       

keys
       
Notes      
Examples used pertain to the sjg kx-tda 200   Some features / facilities may not be available to you / your system due to system programming or additional hardware being required
  consult sjg tech support    
Some features / facilities may not be available to you due to telephone service provider   A guide to icons used in these pages [eg ] is  here
  For Panasonic Digital Terminal [PT] users: You can assign commonly used feature codes to a dedicated button    
Some features / facilities may not be available to you due to system programming / your restriction level     Main User guide menu
      user guide menu
      terminals & phones guide menu
     

Manager's Guide Menu